- 【LIFE-TIME Warranty】 30-Day money back guarantee, LIFE-TIME Warranty and friendly 7 x 15 hours customer service.
- 【Special design for Go pro Hero 12/11/10/9 Black】: The silicone case perfectly fits the Go Pro Hero 12/11/10/9 Black camera frame to achieve seamless installation and precise accuracy.A safety rope is hung on the silicone sleeve to provide more protection for the camera.With the replacement side cover with a small side door, it is easier to charge. It can prevent dust and splash water stains from entering the camera.
- 【 NOTE】The replaced side door cannot be directly immersed in water for use!
- 【2 PACK SCREEN PROTECTOR FOR HERO12/HERO11/HERO10/HERO9 】2 Pack screen protector kit safeguard the lens and touch screen on your HERO9/10/11/12 from scuffs and scratches when the going gets tough. Made from tempered glass, these protectors feature anti-fingerprint and anti-reflective coatings so your footage looks its best.
- 【LATEST SILICONE CASE FOR HERO11 /HERO10/HERO9】Premium Silicone Protective Case protects your Hero9/ Hero10/ Hero11/Hero12 from scratches without adding extra bulk.Side Open Design allows you to charge the camera while recording for extended run times.
- 【PACKAGE LIST】Hero 12/11/10/9 silicone shell x1; Hero 12/11/10/9 display protecti/on film on the back of hardened glass x2; Hero 12/11/10/9 hardened glass windscreen protection x2; Hero12/11/10/9 display protective film made of hardened glass x2; Hero 12/11/10/9 Silicone lens cap x2; Battery side door x1.
FitStill Black Silicone Sleeve Case for Go Pro Hero 12/Hero ...
$47.85
Additional information
| Weight | 1.06 kg |
|---|---|
| Dimensions | 1.18 × 3.94 × 4.72 cm |
J –
Purchased for $15.95 on 11-28-2023.If you have a GoPro, this is a MUST-HAVE kit to protect and preserve your camera. It comes with a silicone sleeve/cover, two sets of screen protectors, two lens covers, replacement battery door with access to USB-C port, lanyard, and supplies for cleaning and installing the screen protectors.The silicone sleeve/cover fits like a glove on the GoPro Hero11 Black and the HERO12 Black. (FiTSTILL lists compatibility down to HERO9 Black.) The density and thickness of the silicone are very good. Your camera will be protected from light to moderate impacts and from scuffs and scratches.There are two sets of screen protectors. They’re not a perfect match, dimensionally, to the glass on the camera, but you really don’t want them to be. They’re just a touch smaller—leaving very, very little uncovered space that would be vulnerable to impact and damage.To apply the screen protectors, you want to make certain that they go on clean, DUST-FREE glass. Even the tiniest speck of dust or lint will leave an annoying blister that never goes away. Every time you look at the screen, that bubble will remind you that you screwed up the installation. It’ll be the permanent pimple on the tip of your nose.So how do you avoid that pesky, ubiquitous dust that’s guarantied to screw up the installation? What’s the best way to apply the screen protectors? Glad you ask, Kemosabe…1. Run a hot shower for a few minutes in your bathroom.2. Let the steam fill the room so any airborne dust can’t remain afloat. They’re knocked down by the moisture/humidity.3. Turn off your A/C or heater, so it doesn’t kick in unexpectedly and blow in dusty air just at the wrong time.4. Clean the camera screens and make certain they’re DUST-FREE just before you enter your ‘clean room.’5. Slowly open the bathroom door. Avoid creating air turbulence that picks up and swirls dust. Enter. Close the door.6. In the bathroom, after one last checking or cleaning of the camera glass, hold the screen protector by the edges and peel off the backing.7. GENTLY place, DON’T PRESS, a screen protector on the matching glass surface. Use a toothpick to move/slide and (re)position it.8. When you’re happy with #7, press down the center of the screen protector with your fingertip. Watch the protector getting “sucked” onto the camera glass.9. Hope there’s no pimple on the tip of your nose.***Although it’s better to not let too much condensation build up on the camera screen, you’re still okay to apply the screen protector even if there is. Any “trapped” moisture will escape, eventually.Two lens covers come with the kit. One is for the naked camera, and the other is for the camera wearing the silicone sleeve. The latter has an eyelet to connect a tether between it and the sleeve to keep it from being lost. Unfortunately, the smaller cover for the naked camera does not have an eyelet.Both lens covers are semi-secure. They’re a good fit and do hold on the lens, not loose to the point that they’ll easily fall off by shaking the camera. However, if you carry the camera in your pocket or bag, it can pull off from rubbing, tossing, and tugging, so keep some rubber bands handy to secure the cap.*Even the larger of the lens covers will NOT work with the Max Lens Mod 2.0. Just use the cover (half of the case) that came with the lens. I assume it doesn’t work with the First Gen Lens Mod either. Also, the silicone sleeve DOES FIT with the Max Lens Mod 2.0 installed.A replacement battery door is included that gives you access to the USB-C port via a smaller door-on-door. This is a great feature.There is a corresponding opening on the silicone sleeve that gives you access to the small door-on-door. No need to peel off the sleeve from the GoPro. (To change the battery or Micro SD, you do need to peel off part of the sleeve to open the battery door.)The only downside to the replacement battery door is that it compromises the waterproof protection that comes with the factory door. With the replacement, the camera is only water resistant. Having said that, I don’t trust the factory door to be full-proof waterproof either. (I would submerge the camera only if it’s enclosed in the Protective Underwater Housing. I’ve read about anecdotal experiences that the factory door didn’t prevent water seepage.)What they call the lanyard is actually a wrist strap. I don’t use it. The nylon rope around the wrist is fine, but I don’t trust the line that attaches to the sleeve/camera. It’s too thin for my liking. Better safe than sorry.Because it is so thin, the first visual cue that hints that the line may fail is the camera launching into the sunset or tumbling down a cliff as I’m twirling the GoPro…not that I twirl.A 10″ length of a braided, nylon line also is included that’s meant to be used as the tether for the larger lens cover. I believe it’s the same, thin line that’s on the wrist strap.Lastly, you get a plastic case that contains the two sets of lens protectors, two small patches of microfiber cloths, two sets of wet/dry wipes for cleaning the camera screens, and two sets of stickers to facilitate aligning and installing the protectors.If you own a HERO12/11/10/9, get this kit. I wholeheartedly recommend it. It’ll be the best $16 +/- add-on to and for your GoPro.With this kit installed on your camera, the perfect complement is FiTSTILL’s “Mini Carrying Case” ($9.99). It’s a zip-up case with a semi-rigid polyurethane outer shell. Between the two, your GoPro will be well p*r*o*t*e*c*t*e*d in your bag or luggage. And with or without the lens cover, a naked or sleeved GoPro fits in the case. Unfortunately, with the Max Lens Mod 2.0 installed, the camera will not fit.
Vinay –
Good product to protect GoPro, case is easy to put on and remove. I am using this product for almost last 9 months and no issues so far. Product is made of good quality material. I am an outdoor person and hike almost every weekend so protecting my GoPro becomes one of the important task for me.
Ronni –
Fits my go pro 11 perfect. I love how it comes with two sets of the protective screens too. Easy to use and showed up super fast! Thanks!
Kevin R –
I had already purchased the GoPro cover but I liked the idea of the charging port access so I purchased this cover with charging port door combo. As a bonus, it also includes a lens cover, a small lanyard (not pictured) and glass covers for the screens and lens with some cleaning patches.The replacement side panel with the charging port door install easily and fit well. The cover also went on easily and fit well. I applied the glass protective covers for the screens but not for the lens, you really have to clean the screens well and make sure there is no lint left behind or you get bubbles. I decided not to risk diminished picture quality using the lens protective glass cover and use the lens cover instead.I’m a firm believer in tethering an action camera like the GoPro Hero 10 whenever possible. The camera case included a molded piece for attaching a tether and a small one was included in the package. I had already purchased the GoPro Case and it had a nice relatively long and sturdy looking (by comparison with the included one) tether which I used instead (pictured).I also attached the included lens cover using the thread like string included for the purpose. The lens cover fits okay but is pretty easy to dislodge. Also, I totally ruined one shot because the lens cover was fluttering around on it’s string during shooting and obscured the shot. Lesson learned and I loop the lens cover onto the clamp screw that holds the GoPro to the mount you use or otherwise make sure to secure it out of shot.Overall it’s a good package. the charging door is great and I don’t have to remove the camera case just to charge the battery any longer. The tethering option is also a big plus and I always use it. The lens cap (easily dislodged) and glass protective lens (hard to apply cleanly) are okay.
JTCJC –
Exactly what I was looking for! Slim lightweight case to protect from normal use. The quality seems very good though I can’t comment on longevity since I have only had it a few weeks. The screen and lens protector is easy to install if the surface is clean. Comes with everything require for installation. I did not get any dust or bubbles. Just line up and tap the center and it will self seal. The is a YouTube video if you are unsure. It did not affect picture quality.A few things to be aware of:1 – the battery door that comes with this kit is NOT waterproof. I hang a red “Remove Before Flight” tag on it when this door is installed.2 – the charging flap on the door is deep so only straight USB-C connectors will fit. I tried a 90 degree plug and it was not deep enough.3 – the soft rubber lens cap doe not stay on well. If you through the GoPro in you bag or pocket it will fall off but at least it has the lense protector on it. I plan to use a rubber band or similar to wrap around the body and hold it on. Their new design should take add loops to the cover and an elastic band to hold it on.
John C Dixon Jr –
Great value for the money.
Wayne P –
I wasted money on another brand of GoPro Hero 10 screen protectors before I bought these. These all fit well. The case fits well too. Very good product! I would buy this again.
matt –
Its a nice set to protect my go pro, i mainly wanted the screen protectors and the outer silicone cover. The lid to cover the camera doesn’t have a lip or anything to really hold so it just sits on it. Other than that its a good way to protect my camera
Jade –
The case is a perfect fit as well as the screen protectors (there are extras)!
cole erhardt –
I use the silicone sock in cold weather applications to keep the camera warm. The glass protectors fit well and don’t muddy the image quality. Haven’t used the battery door outside of a test fit (it fit pretty good). Overall nothing here feels like cheap garbage with is always good.
abel contreras –
excellent
Lucas Martínez –
Producto de buena calidad, exactamente lo que ofrece y una rápida entrega
Michael Taylor –
I do a lot of caving with a GoPro on my helmet. This perfectly protects the camera from the hundreds of bumps and scraps.
Marinda –
GOOD QUALITY
Julio De Las Casas –
Funciona bien, protege las pantallas y la cámara . Recomendable , adicional viene con doble protectores de pantallas y lente (el del lente no lo puse , por que recomiendan no hacerlo, para no perder la funcionalidad de anti empañamiento). También viene una tapa adicional para cargar la batería sin sacarla . Vale la pena … comprarla
Carlos Rivas –
buena calidad de los materiales
Brittany Wallace –
They all serve their purpose well. We haven’t had any issues and we do a lot of hiking, roadtripping and water activities.
Kobi liany –
Protecting the not so cheap GoPro 12 black I bought was my first privately. That kit gave me exactly what I needed for my use. It was easy to fit and already it saved the camera from a reckless fall. I recommend!
Oscar L. Fermin –
The case is made o a nice soft siliconeThe screen protectors have a good finish.And you get everything to install everything
Axel Ramirez –
Excelente calidad de los materiales y de fácil instalación. Los protectores para las pantallas no disminuyen en absoluto el touch de las mismas . Pero el cambiarle la tapa lateral acaba de hacer que se arruine mi cámara al entrarle agua
sylvia brenner –
Fits perfect
Daniel Silva –
Now I can record my driving without swapping batteries out ever 2 hours
Jason –
The media could not be loaded.
Put these screen protectors on just as added protection for my GoPro. I had it fall off my skid steer then ran it over 3 times. Screen protectors took all the damage. Not a scratch or crack on the GoPros screens themselves. Already order replacements!
the kenster –
great product easy to install-well worth it.
Santiago Fajardo C –
Just what I needed to protect my GoPro. Go get it
Anatolii –
Very good thing
Sheii –
Recommend 20/10 😍
peter –
Instructions could be better
osval –
Amortigua bien las caídas y golpes
Anthony –
C’mon now, make the case match the battery doorway! I cut this case to be able to swap batteries quickly in the field, nice to charge without the whole door open, but still would have to take the case off to swap batteries. Another half thought out, knock off accessory, go pro couldn’t make.
P. Morris –
This cover fits my GoPro Hero 12 nicely, but my only gripe is you have to take it completely off in order to access the battery. It’s a pain to do that every time I want to charge or remove the battery to replace with a fresh one.
Ben Ellis –
First of all the silicone cover attracts a lot of dust. Idk if there was a defect in the screen protectors I received but the two for the front screen of the GoPro wouldn’t stick on. Almost like they didn’t gave any adhesive on them. The one for the large rear screen worked perfectly.
Clark –
Exactly as described and quick delivery!
mike –
the kit was easy to use
Freddy –
The protection level of this item is very good. Your GoPro is already expensive. You definitely want to protect it. I mainly use my GoPro for motorcycle riding and outdoor fishing and I am super happy with this product and it’s protection level.
Bob Tobias –
The media could not be loaded.
Let’s break this product down into its component pieces…The Sleeve is made of thick silicon, perhaps silicon-like, material. I can stuff my GoPro 10 into it easily enough. Once inside, the sleeve stays on securely.The Replacement Battery Door is almost worth the price of everything. It has a flap that allows me to charge my battery or transfer files while my GoPro is still in the sleeve. With a large memory card and an external battery to charge the camera while I’m on the move, I can shoot a whole day without having to remove the sleeve. Using a sleeve without this feature means you’ll be taking the sleeve off and putting it back on every hour or so to replace or charge the battery.You get Two Lens Caps. One is for the when the GoPro is in the sleeve, and the other one fits over the lens when it isn’t. The on-sleeve cap comes with a piece of string to keep it from getting lost. One end goes to a small tab on the cap, and the other end ties… somewhere. I connect it through a couple of the speaker holes on the sleeve.The Wrist Strap is nicer than I had expected. However, I use my
Peak Design Cuff Camera Wrist Strap
because I already have it, and it’s even better.The Lens/Screen Protectors are a mixed bag. They’re all tempered glass and include all manner of cleaning and drying cloths, adhesive lint removers, and adhesive positioning tabs. They are easy to install and the rear protector doesn’t interfere with touch screen operation. My problem is with the lens protector on a Hero 10. The lens already has a special coating that repels water. Covering the lens with a protector will negate the usefulness of that coating and destroy it when it’s eventually removed. My recommendation, especially in light of the two included lens covers, is to leave it off.For me, the combination of a durable sleeve with a loop to accommodate my strap (or the nice one that’s included) along with the modified battery door makes this a great addition to my GoPro.
1000 % recommended 🤩🤩🤩🤩🤩 –
Jeff Ellis –
With the rubber casing on the camera the rubber lens cover will not go on
Sukesh –
I bought it before I bought my GoPro 9. It covers your camera very well to carry around but same time, I haven’t find much use of it. It’s really nice and comfortable to fit on the camera but I don’t think I needed it. Little expensive I think. Thanks.
Paul –
It’s OK just not what I thought
Svetlana –
Silicon case feels nice and durable. It is perfect for GoPro 12 and the battery door makes it easy to charge the camera. Protective glass also fits but you need to clean it constantly for finger marks. Anyway it’s a great product for the price and gives me confidence that I won’t ruin my camera in the bag or if I drop it.
Nobody from nowhere –
Getting the lens and screen protectors on is pretty easy if you take your time. Go pro’s are pretty tough to begin with, but if you damage a screen or lens while you are out on a trip, you cant fix it and it becomes a brick you need to carry with you until you do. The back screen protector paid for itself when I set my camera on the motorcycle seat and it fell to the concrete floor. The screen protector was damaged but not the actual screen. I didnt yet get a chance to add the silicone case over the camera. The battery door is OK. I went scattering one the floor and I had to look for it, so just make sure you have the case over it. Note the door is not waterproof like the original one. Its a good idea to add another layer of protection for your camera if you intend to use it like its meant to. Of course, Go pro will replace a damaged camera if you are on their plan, but its a pain to manage and not really worth it if you camera is over a year old.
Amazon Customer –
I purchased this cover for our Hero12 thinking it might give it a little easier to grip, but it had the adverse effect. It’s much slippery than the camera is by itself. It also requires more pressure to activate the buttons. I did like the glass protectors though.
John Karr –
Lens cap fit could be a better match.